Viessmann Gas Boilers For Your Home
Phoenix Heating & Cooling has been installing Viessmann Gas Boilers in homes across Toronto for over 35 years.
Toronto Gas Boiler Installation
Veissmann gas boilers are some of the most economical and clean ways to generate heat for your Toronto home. Veissmann gas boilers run so efficiently that they can significantly reduce your monthly heating bills. On top of that, they run so clean and use so little energy that they can drastically reduce your environmental footprint too.
Veissmann Gas Boilers: VITODENS 100-W
Gas-fired wall-mounted condensing boiler with modulating stainless steel cylinder burner and Inox-Radial heat exchanger surface. Rated input: 21 to 125 MBH
- Vitodens 100-W, B1HA space heating boiler and Vitodens 100-W, B1KA Combi boiler fits any home and budget with high performance at an attractive price.
- Outstanding efficiency of 95% A.F.U.E. on all models.
- Low-emission combustion with fully-modulating Viessmann stainless steel MatriX cylinder burner for natural gas or propane.
- User-friendly backlit LCD touchscreen boiler control.
- Lasting performance with proven Viessmann stainless steel Inox-Radial heat exchanger constructed to CSA B51 and ASME Section IV.
- Suitable for altitude levels of up to 10,000 ft. / 3,000 m.
- Easy installation and service with pipe connections located at the bottom and serviceable components accessible from the front.
- Extremely quiet operation; quieter than most refrigerators.
- Built-in on-demand domestic hot water (DHW) with Vitodens 100-W, B1KA Combi boiler. Ideal for apartment units or houses with small mechanical rooms and a single DHW draw point.
Veissmann Gas Boilers: VITODENS 200-W
Gas-fired wall-mounted condensing boiler with modulating stainless steel cylinder burner and Inox-Radial heat exchanger surface. Rated input: 12 to 530 MBH
- Best value in its class with new industry-leading technology and the most standard features.
- Lasting performance with industry-leading Viessmann made SA240 316 Ti stainless steel Inox-Radial heat exchanger constructed to CSA B51 and ASME Section IV.
- Low-emission combustion for environmentally-friendly operation.
- Intelligent Lambda Pro gas management system automatically adjusts to different gas qualities for optimum efficiency and performance.
- Modulation ratio up to 6.5:1 ensures extremely high efficiency.
- Multiple venting options and greater venting flexibility with vent length up to 180 ft.
- Compact, lightweight design and zero clearance to combustibles.
- Extremely quiet operation; quieter than most refrigerators.
Veissmann Gas Boilers: VITODENS 222-F
Gas-fired condensing technology and innovative DHW solution in a compact, floor standing design. Rated input: 12 to 125 MBH
- Efficiency up to 98% at full modulation and 95% AFUE. Exceeds ENERGY STAR® efficiency requirements.
- Low emission combustion and continuous efficiency from Viessmann stainless steel MatriX cylinder burner with
- Lambda Pro combustion management system.
- Wide modulation range up to 6.5:1 to precisely match load conditions.
- Fast heat-up with innovative DHW Storage Tank Loading System comprised of plate heat exchanger, DHW loading pump and storage tank.
- Compact and hygienic DHW storage with Viessmann-made SA240 316Ti stainless steel tank (26 USG).
- Ten-minute peak flow of 60 gallons (model B2TB 35/125 only) and continuous DHW draw of 3.3 GPM. Based on a temperature rise of 70 °F (50 °F to 120 °F).
- Space-saving design with a small footprint and zero side clearance to combustibles.
- Simplified installation with pre-installed pressure/temperature relief valves, fully enclosed heating expansion tank and circulation pump, and built-in 3-speed DHW / space heating pump with diverter valve.
- Multiple venting options with vent length up to 180 ft.
Veissmann Gas Boilers: VITOCROSSAL 300
CU3A Series gas-fired condensing boiler with stainless steel Inox-Crossal heat exchanger and MatriX dome gas burner. Rated input: 19 to 199 MBH (single) / 1592 MBH (cascade).
- Compact, floor-standing gas condensing boiler from 19-199 MBH.
- A high efficiency of 95% AFUE on all models.
- High-temperature operation of up to 90°C (194°F).
- Vitocrossal Pocket Design with wide water passageways allow for system/full flow applications. No dedicated boiler pump required and eliminates primary/secondary piping.
- MatriX dome gas burner with 5:1 turndown ratio to ensure high efficiency and extremely clean combustion.
- High water volume extends burner run time and reduces cycling.
- A self-calibrating Lambda Pro combustion management system ensures optimal combustion efficiency at all times regardless of gas/air quality. Simple commissioning with no field adjustments and adjusts to all fuel types (NG and LPG).
- Durable, reliable, and long service life with Inox-Crossal stainless steel heat exchanger and high mass design.
- Multiple venting options and configurations with vent lengths up to 198 ft.
- Multi-boiler installation with 8 boilers up to 1592 MBH.
Accreditations
